Stereo Reception With The Built-In Analogue Tuner - Toshiba 19DV713B Owner's Manual

Stereo reception with the built-in analogue tuner

The TV's built-in tuner can detect and receive NICAM stereo broadcasts automatically.
Note:
Bad reception can cause
disturbance to stereo sound.
In some cases, NICAM
stereo sound may not be
received correctly. In the
case of two-channel sound
reception, press AUDIO
SELECT
to switch to a
sound channel with better
audio quality.
24
NICAM stereo sound reception
Press MENU SETUP
1
screen.
/
to select Sound, and then press
Press
ENTER/CH LIST
.
Select NICAM, and then press
2
Auto or Off.
Select Off if you do not want to receive NICAM
sound.
Press EXIT/CANCEL
3
The following types of broadcast are possible with NICAM transmissions:
• NICAM ST: Illuminates for approx. 4 seconds when a
NICAM STEREO broadcast signal is received.
• NICAM M1: Illuminates for approx. 4 seconds when a
NICAM MONO A broadcast signal is received.
• NICAM M1/ M2: Illuminates for approx. 4 seconds
when a NICAM MONO A and MONO B broadcast
signals are received.
• NICAM OFF: Appears for approx. 4 seconds when a
NICAM signal is received and the NICAM Off option is
selected.
Stereo reception in Germany
STEREO illuminates for approx. 4 seconds when a
STEREO broadcast signal is received.
Two-channel sound reception
When two-channel sound reception is available, press AUDIO SELECT
preferred audio channel.
Each time you press AUDIO SELECT
alternative channels available.
NICAM two-channel sound reception (not available in Germany)
Two-channel sound reception in Germany
to display the Main Menu
/
to select
to return to the normal screen.
, the sound channel will switch between the two
S o u n d
Sound
NICAM
Bass 15
Treble 15
Balance
HDMI1 Audio
Digital Audio Output
Reset
: Adjust
NICAM ST
N I C A M M 1
NICAM M1 / M2
NICAM Off
S t e r e o
to select your
S o u n d
Auto
HDMI
Bitstream