Pc Connection - Toshiba 19DV713B Owner's Manual

PC connection

As PCs are sometimes supplied with a "conventional" CRT monitor, you may need to adjust the display settings of your PC's
graphic card; otherwise the pictures may not appear correctly. Switch on your PC (still with your original monitor), select "1360 x
768" for the screen resolution, and select "60 Hz" for the on-screen refresh rate. Switch off your PC, and then connect it to your
TV while both items are switched off.
Monitor display modes
Mode Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
WXGA 1280 x 720
WXGA 1280 x 768
WXGA 1360 x 768
(according to graphic card)
Select PC input
(1) Switch on the TV.
(2) Switch on the computer.
(3) Select the PC input mode on the TV
(see page 17). (When you use an
HDMI cable, select HDMI input
mode.)
Note:
• The PC audio input terminal on the TV
is shared with the HDMI 1 analogue
audio input terminal.
• If there is no video signal from the
computer when the TV is in PC mode,
No Signal will appear on the TV
screen.
• If a digital PC connection does show
a picture, proper working is not
guaranteed. Digital PC connection
is not granted for this TV.
After connecting a PC to your TV, you can now configure the display and audio settings.
To configure the display settings:
(1) Press MENU SETUP
screen.
/
to select the Picture menu, and then press
(2) Press
ENTER/CH LIST
(3) On the Picture menu, you can adjust various picture
properties such as brightness, contrast, sharpness,
colour, tint, colour temperature, backlight, and dynalight.
Note: Tint can be adjusted only when NTSC signal is
supported.
(4) For a list of available menu options in the Picture menu,
see page 27.
74
V. Frequency
59.940 Hz
60.317 Hz
60.004 Hz
60.000 Hz
59.870 Hz
60.015 Hz
Use a PC-VGA cable (not supplied) to connect the TV to your PC. You can also use
an HDMI cable to connect the TV to your PC. When the HDMI cable is used, the
audio cable is no longer required. If you use the HDMI-to-DVI cable, please connect
audio cable in the same way as VGA cable. Connect cables carefully. Do not bend
or break the connector pins.
TV（Back side view）
To adjust the contrast:
During PC mode, press MENU SETUP
1
2 Press
Press
Select Contrast and then press ENTER/CH LIST
Press
3
Press EXIT/CANCEL
to display the Main Menu
.
H. Frequency
31.469 kHz
37.879 kHz
48.363 kHz
45.000 kHz
47.776 kHz
47.712 kHz
HDMI-to-DVI cable To DVI output
HEAD PHONE
OUT SCART (AV1) IN
DIGITAL AUDIO
OPTICAL PC MONITOR TUNER
COMPOSITE(AV2) IN COMPONENT IN PC/
HDMI 1
R L VIDEO R L Pr Pb Y
AUDIO HDMI 1
To HDMI input
To PC/HDMI 1
AUDIO input
(All illustrated cables are not supplied.)
/
to select Picture, and then press ENTER/CH LIST
/
to select Picture Setting, and then press ENTER/CH LIST
/
to adjust the contrast.
to return to the normal screen.
To configure the audio settings:
(1) Press MENU SETUP
screen.
/
to select the Sound menu, and then press
(2) Press
ENTER/CH LIST
(3) On the Sound menu, you can adjust the NICAM stereo
reception, and the bass, treble, balance, and sound
effects.
Note: NICAM is available only when the TV is set to ATV
mode.
(4) For a list of available menu options in the Sound menu,
see page 27.
Pixel Clock Frequency
25.175 MHz
40.000 MHz
65.000 MHz
74.250 MHz
79.500 MHz
85.500 MHz
VGA cable
Audio cable
to display the Main Menu screen.
.
to display the Main Menu
.
PC
.
.