Selecting The Cinema Mode (480I Signals Only); Using The Freeze Feature - Toshiba 32HLX95 Owner's Manual

Selecting the cinema mode
(480i signals only)
When you view a DVD (480i signal; 3:2 pulldown processed)
from a DVD player connected to the VIDEO 1, VIDEO 2,
ColorStream HD 1/HD 2 (component video), or HDMI inputs
on the TV, smoother motion can be obtained by setting the
Cinema Mode to Film.
To set the Cinema Mode to Film:
1. Press MENU and open the Video menu.
2. Highlight Theater Settings and press ENTER.
Video
Picture Settings
Advanced Picture Settings
Theater Settings
Navigate Select CH RTN Back EXIT
3. In the Cinema Mode field, select Film.
Theater Settings
Picture Size
Picture Scroll -1
Cinema Mode
Auto Aspect Ratio
Reset
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
To set the Cinema Mode to Video:
Select Video in step 3 above.
68
Chapter 8: Using the TV's features
Exit
Natural
Film
On
Done
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

Using the FREEZE feature

1. When viewing the TV, press FREEZE to make the picture a
still picture.
2. To return to the moving picture, either press FREEZE
again, press EXIT or press any other button.
Note: If the TV is left in FREEZE mode, after 15 minutes it will
automatically release the FREEZE mode and return to the
moving picture.
Moving picture
Using the FREEZE function for any purpose other than your
private viewing may be prohibited under the Copyright Laws of
the United States and other countries, and may subject you to
civil and criminal liability.
Still picture
FREEZE