Version; Software Upgrade; Common Interface - Toshiba 19DV615DB Owner's Manual

Version/Software Upgrade/Common Interface
Note:
• Do not disconnect the AC cord when
the software upgrade is in progress,
as this may cause the upgrade to fail.
At this time you cannot use any of the
buttons.
• When the unit searches for a software
upgrade signal, the message 'Please
wait...' will be displayed.
26
52R0201A_ENG.indd 26 52R0201A_ENG.indd 26

Version

You can check the software and hardware versions.
1
Press ▲ or ▼ to
select 'Version', then
press ENTER.
The hardware and
software versions are
displayed.
2
Press EXIT to return to the normal screen.

Software Upgrade

Software Upgrade allows you to download the latest software
available on the Engineering channel.
Manual upgrade
1
Press ▲ or ▼ to
select 'Software
upgrade', then press
ENTER.
2
If a software upgrade is available from an Over Air
Download (OAD) then the message 'S/W available, do you
want to download?' will be displayed - you can then select
'Yes' or 'No' by pressing ◀ or ▶, then press ENTER.
3
If you select the option 'Yes' then the Software Upgrade
process will be initiated. It will take about 20 minutes and
after this process is complete, the TV will be rebooted
automatically.
If you select the option 'No' you can continue to watch TV
programmes as before.
Auto upgrade
1
When you tune to the service that provides the upgrade via
Over Air Download, a confirmation message displays.
2
Follow the screen prompts.

Common Interface

You can access the Common Interface module information from
this menu option.
Preparations
Insert CAM into the DVB Common Interface slot on the backside
of the TV (see page 9).
1
Press ◀ or ▶ to
M
select 'Common
Interface', then press
ENTER.
2
The CAM module name will be displayed. You have to press
ENTER to view further information.
3
In the CI Menu, CAM specific information such as Module
information, Smart card information, Language and
Software Download are shown.
Press ▲ or ▼ to select information, then press
ENTER to see detail.
4
Press EXIT to return to the normal screen.
Main menu Technical Information
1
CH Texd
i i
ABC ABC
2
CH
3
CH
Version
Software upgrade
Main menu Technical Information
1
CH Texd
i
i
ABC
ABC
2
CH
3
CH
Version
Software upgrade
a n i m e n u C o m m o n
1
Texd
CH
i i
ABC
ABC
2
CH
3
CH
Common Interface
I t n r e a f c e
3/4/09 10:21:04 AM 3/4/09 10:21:04 AM