Zoom Function/Scene Navigation - Toshiba 19DV713B Owner's Manual

Zoom function/Scene navigation

Using the Zoom function (DVD/VCD)
You can change the viewing scale of a picture by using the Zoom function. Once the image has
been rescaled, use the arrow buttons
Press CH RTN ZOOM
1
The view will zoom into the centre of the image.
Each press of the button will increase the scale value:
1(x 1.3), 2 (x 1.5), and
/ / /
2 Press
To return to normal view, press CH RTN ZOOM
3
Note:
• You can use the Pause and Slow playback functions in Zoom mode.
• Zoom function may not apply to some discs.
• You can use the Zoom function for DivX
Locating a specific scene (DVD/VCD/Audio CD)
Scene navigation options differ depending on the kind of disc. DVDs use the title, chapter or
record time to locate the start point for playback; audio and video CDs use the record time or
track number. To view the disc's title/track, chapter, and time list, press
Press JUMP
1
during playback, resume or stop
mode.
/
to select a navigation option: Title/Track,
2
Press
Chapter or Time.
Use the number buttons (0–9) to key in a value for the
3
navigation option you selected.
If you input a wrong number, press EXIT/CANCEL
Refer to the disc package to check the correct number.
Press ENTER/CH LIST
4
Note:
• When you use title navigation, playback starts from the first chapter of the selected title.
• Scene navigation may not apply to some discs.
• Scene navigation by record time is applicable only to DivX
• For audio and video CDs, you can locate a scene by track number or record time.
• For PBC-enabled VCDs, turn off the PBC function first before using the JUMP function (see
page 58 for instructions).
/ /
/
during playback.
3 (x 2.0).
to pan the scene and view different sections of the picture.
®
CDs.
to start playback.
to pan the image.
Off appears.
repeatedly until
.
Jump
Title
Chapter
Time
Jump
Title
Chapter
Time
Jump
Title
.
Chapter
Time
®
CDs.
1
53