Connecting Tv To Other Equipment; Connecting An Audio System - Toshiba 19DV713B Owner's Manual

Lcd tv/dvd combination

Hide thumbs

Table Of Contents

Table of Contents

Connecting aerials and other devices to your TV

Connect the TV's coaxial cable directly to the aerial input jack at the back of the TV.

Satellite

antenna

Decoder

Caution:

Before connecting:

• Make sure to disconnect the appliance from the power supply in order to avoid any potential damage from occurring.

• Make sure to establish the required connection.

• Make sure that connections are properly and correctly attached before connecting the appliance to the power supply.

Connecting an audio system

The TV's digital audio out terminal outputs a Dolby Digital or two-channel down-mixed PCM (Pulse-Code Modulation)

signal for use with an external Dolby Digital decoder, surround sound amplifier, etc. with optical audio input. An optical

audio cable is required for the connection. Use an optical audio cable that has the larger "TosLink" connector and not the

smaller "mini-optical" connecter.

If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded soundtracks on DVDs

and audio CDs.

To Optical Digital

Audio output

Note:

• The digital audio out terminal may not output some digital audio sources because of copy restrictions.

• The Bass/Treble/Balance adjustments function only with the sound from the TV speakers.

• After connecting a Dolby Digital decoder, please select in the DVD menu the Dolby Digital (DD) sound track option.

• Several DVDs may be pre-recorded on both sides. However only one side contains the Dolby Digital sound track. Please

insert the correct DVD side.

• When a DTS sound track is played, the integrated loudspeakers are muted. The DTS sound can only be played digitally

using the digital outlet. DTS decoder is necessary for hearing.

• Digital audio output is active only when receiving DVB-T, not when receiving analogue cable TV broadcasting.