ESAB TWECO SPRAY MASTER V250 Safety And Operating Instructions Manual

ESAB TWECO SPRAY MASTER V250 Safety And Operating Instructions Manual

Mig guns

Advertisement

SPRAY MASTER™
WITH VELOCITY2 CONSUMABLES
Safety and
Operating
Instructions
English
Revision: AD
MIG GUNS
Issue Date: 20-06-2018
Manual No.: 89200016
AIR-COOLED MIG GUN
250 AMP
350 AMP
450 AMP
CURRENT
WIRE SIZE
DUTY CYCL E
UP TO
UP TO
UP TO
450
/
3
32 "
80%
AMPS
(2.4 mm)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TWECO SPRAY MASTER V250 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ESAB TWECO SPRAY MASTER V250

  • Page 1 AIR-COOLED MIG GUN 250 AMP 350 AMP 450 AMP SPRAY MASTER™ WITH VELOCITY2 CONSUMABLES MIG GUNS Safety and Operating Instructions English CURRENT WIRE SIZE DUTY CYCL E UP TO UP TO UP TO 32 " AMPS (2.4 mm) Revision: AD Issue Date: 20-06-2018 Manual No.: 89200016...
  • Page 2 YOU ARE IN GOOD COMPANY! Tweco is a Global Brand of Arc Welding Products for ESAB. We distinguish ourselves from our competition through market-leading innovation and truly dependable products that will stand the test of time.
  • Page 3 U.S. Customer Care: (800) 426-1888 International Customer Care: (940) 381-1212 Canada Customer Care: 905-827-4515 / fax 800-588-1714 Copyright © 2014, 2015, 2018 ESAB. All rights reserved. Reproduction of this work, in whole or in part, without written permission of the publisher is prohibited.
  • Page 4: Table Of Contents

    Table of Contents SECTION 1: SAFETY PRECAUTIONS ................2 Mesures de sécurité ................. 2 SECTION 2: INTRODUCTION ..................4 2.01 How to Use this Manual ..............4 2.02 Receipt of Equipment ............... 4 2.03 Description ..................4 SECTION 3: MIG GUN SPECIFICATIONS..............4 3.01 MIG Gun Classification ..............
  • Page 5 SAFETY AND OPERATING INSTRUCTIONS such as during lunch or overnight, all electrode holders and electrodes should be removed conditions d’humidité ou de chaleur où l’opérateur risque de transpirer, il est recommandé from the electrode holder and the power supply should be turned off to prevent accidental d’utiliser des contrôles automatiques pour réduire la tension à...
  • Page 6: Section 2: Introduction

    Miller is registered trademark of Illinois Tool Works, Inc. Lincoln is a registered trademark of Lincoln Electric Co. The aforementioned registered trademarks are no way affiliated with Tweco Products, Inc. or ESAB. Tweco Spray Master is a registered trademark of ESAB.
  • Page 7: Section 5: Spray Master With Velocity2 Maintenance

    SAFETY AND OPERATING INSTRUCTIONS SECTION 5: SPRAY MASTER WITH VELOCITY2 MAINTENANCE This section discusses servicing and or replacing various components of the Spray Master MIG Gun. WARNING Disconnect power from MIG Gun before servicing. 5.01 INSTALLING OR REPLACING VELOCITY2 CONTACT TIP Avoid excessive consumables wear by periodically rotating tips.
  • Page 8: Replace Conductor Tube

    SAFETY AND OPERATING INSTRUCTIONS SECTION 8: CONSUMABLES Lock Collar Spring Washer Snap Ring 8.01 TIPS AND NOZZLES VELOCITY2 Nozzle Identification S= Small (Light Duty) Slide the Stainless Steel Sleeve onto the conductor tube end. M=Medium Duty Align the set screw with the threaded hole in the conductor tube and tighten H=Heavy Duty Blank= Fixed Threaded until the screw bottoms out.
  • Page 9: Conduit

    SAFETY AND OPERATING INSTRUCTIONS Medium Duty Contact Tips Heavy Duty Contact Tips Extended Taper Contact Tips Description Part No. Stock No. Description Part No. Stock No. Description Part No. Stock No. VTM23 VTH30 VTET30 .023" (0.6 mm) 1160-1750 .030" (0.8 mm) 1160-1760 .030"...
  • Page 10: Section 9: Replacement Parts

    SAFETY AND OPERATING INSTRUCTIONS SECTION 9: REPLACEMENT PARTS Refer to Section 8 for Nozzles and Contact Tips Refer to 8.01 Tips and Nozzles for tip and nozzle part numbers and descriptions. Refer to 8.02 Conduit for conduit part numbers and descriptions. Refer to 8.03 Conductor Tube for conductor tube part numbers and descriptions.
  • Page 11: Section 10: Statement Of Warranty

    10.01 WARRANTY SCHEDULE The warranty is effective below for the time stated in the Warranty Schedule beginning on the date that the authorized distributor delivers the products to the purchaser. ESAB reserves the right to request documented evidence of date of purchase.
  • Page 12 Fax: +1 905 670 48 79 ROMANIA SOUTH AFRICA Tel/Fax: +359 2 974 42 88 MEXICO ESAB Romania Trading SRL ESAB Africa Welding & Cutting Ltd THE CZECH REPUBLIC Bucharest Durbanvill 7570 - Cape Town ESAB Mexico S.A. ESAB VAMBERK s.r.o.

This manual is also suitable for:

Tweco spray master v350Tweco spray master v450

Table of Contents