Related Manuals for Wampat W11F6071W
Summary of Contents for Wampat W11F6071W
- Page 1 Assembly Instructions W11F6071W W11F6072C Please read this manual carefully before beginning assembly of this product.Keep this manual for future reference.
- Page 4 Cam bolt Cam lock Cam lock Wooden dowel Wooden dowel Glue tube Ø8x30mm Ø6x30mm Ø15x12mm Ø7x34mm Ø14x11mm x 18 x 12 x 12 x 20 Screw Cam bolt Handle bolt Handle bolt Handle Handle Ø4x30mm Ø6x29mm M4x21-Ø8mm M4x12-Ø8mm x 20 x 20 Screw Screw...
- Page 5 ● The provided glue(A) is to secure wood dowels(B) in place . When first inserting dowels, locate the appropriate hole for the dowel , place a small amount of glue in the hole and insert the dowel . Wipe away excess glue immediately.
- Page 6 x 10 · Insert dowels (B) into panels (6,7).
- Page 7 · Attach panels (6,7) to panels (3,4). · Insert and secure cam locks (D) to panels (6,7) to lock it.
- Page 8 · Attach panel (2) to panels (3,4,6) using screws (M).
- Page 9 · Attach legs (8) to panel (2) . · Stick the skid pads (N) on the bottom of the legs (8).
- Page 10 ·Carefully slide panel (5) into place along the back of the assembly.
- Page 11 · Screw cam bolts (E) into panel (1).
- Page 12 · Attach panel (1) to panels (3,4). · Insert and secure cam locks (D) to panels (3,4) to lock it.
- Page 13 · Secure parts (O) to panels (1,3,4,6) using screws (P).
- Page 14 · Attach panels (11,12) to panel (10) with screws (L). · Carefully slide panel (13) into place along the bottom of the assembly.
- Page 15 · Screw cam bolts (G) into panel (9). · Attach Handle (H) to panel (9) with bolts (I). · Attach panel (9) to panels (11,12). · Insert and secure cam locks (F) to panels (11,12) to lock it.
- Page 16 · Screw cam bolts (G) into panel (14). x 16 · Attach Handle (J) to panel (14) with bolts (K). · Insert dowels (C) into panels (16,17).
- Page 17 x 16 · Attach panels (16,17) to panel (15) with screws (L). · Carefully slide panel (18) into place along the bottom of the assembly.
- Page 18 x 16 · Attach panel (14) to panels (16,17). · Insert and secure cam locks (F) to panels (16,17) to lock it.
- Page 19 Slider arm Slider bracket Slider bracket · Assembled the drawers as per diagram Note : If the drawer does not go in smoothly. Press or lift the plastic release lever. Pull out the slider bracket from the slider arm. Loosen the screws on slider brackets, You can adjust up or down by a few mm.
- Page 20 WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors.
-
Page 21: Final Assembly
Final Assembly...