Main Screen Mode; Selecting The Length Unit; Back/Clear - Parkside PLEM 50 C4 Operating Instructions Manual

Main screen mode

♦ Press the ON/OFF button
screen mode.
In the main screen mode, no data are visible on the display 1 and
you can press any button to switch to the corresponding mode.

Selecting the length unit

♦ Press the Unit button
set the following length units in this order:
Length
0.000 m
0.00 ft
0 ¹⁄₁₆ in
0'00'' ¹⁄₁₆

Back/Clear

♦ In any mode, press the Back/Clear button 6 multiple times to
clear the last measured value and return to the previous value or
the previous mode.
♦ If necessary, press the Back/Clear button 6 several times to
return to the main screen mode.
Note: Pressing the Back/Clear button 6 while in continuous
measurement mode will stop the measurement.
PLEM 50 C4
9 in any mode to return to the main
8 to switch to a different unit. You can
Area
0.000 m²
0.00 ft²
0.00 ft²
0.00 ft²
Volume
0.000 m³
0.00 ft³
0.00 ft³
0.00 ft³
GB │ IE │
13 ■