Parkside PLEM 50 C4 Operating Instructions Manual page 9

■ Do not expose the device to any extremes of temperature or
temperature fluctuations. For example, do not leave it lying in a
car for extended periods. After exposure to large temperature
fluctuations, allow the device to acclimatise before using it again.
The precision of the device can be adversely affected by extreme
temperatures or temperature fluctuations.
■ Avoid hefty knocks or dropping the device.
■ WARNING! Switch the device off immediately and remove
the batteries from the device if you notice unusual noises, a
burning smell or smoke. Have the device checked by a qualified
specialist before using it again.
■ WARNING! Protect yourself from laser radiation!
—
Laser radiation! Do not look into the beam!
Class 2 laser!
CAUTION
— Never look directly into the laser beam output opening.
— Looking at a laser beam through optical instruments (e.g. mag-
nifying glasses or similar) can cause eye injuries.
│ GB │ IE
■ 6
LASER RADIATION
DO NOT STARE INTO BEAM
630-670nm / Power < 1m
CLASS 2 LASER PRODUCT
EN 60825-1:2014 / A11:2021
w
PLEM 50 C4