Measured Value Functions; Area - Parkside PLEM 50 C4 Operating Instructions Manual

Measured value functions

To make it easier to process measurement results, the device offers a
number of integrated functions.
♦ Press the Function Selection button
to activate the following functions:
area, volume, single Pythagoras, double Pythagoras.
Note: The desired function must be selected once before the
measurement. After taking a measurement in the selected function,
the last selected function is reactivated.

Area

♦ Press the Function Selection button
g appears on the display 1.
♦ Press the MEAS button
and width of the area being measured (see also the section "Sin-
gle measurements").
The corresponding line in the area symbol
vidual measured values. Immediately after the second measurement,
the calculated area is shown in the result line s of the display 1
and the corresponding line of the area symbol
The length, width and circumference are shown in sequence in the top
three lines of the display 1.
PLEM 50 C4
e once or multiple times
e until the area symbol
r repeatedly to determine the length
g flashes for the indi-
g stops flashing.
GB │ IE │
17 ■