Single Distance Measurement Mode - Parkside PMML 5 A1 Operation And Safety Notes

- Ensure that there are no objects positioned
within the measurement area, which could
reflect the laser prematurely.
- The batteries must not be empty. Empty
batteries are shown in the display
the battery symbol
- If a definitive measurement is not possible,
the display shows the "Err" information.
The measurement must then be repeated.
Single distance
measurement mode
1. Slide the function switch
"DISTANCE". The display
itself on. You can switch between me-
ter and feet / inch. To switch between
meter and feet / inch, press and hold
the MODE button
READ button
buttons simultaneously. When the
buttons are released, the measurement
unit
22
Note: The measuring unit
be changed after any measurement
by following above mentioned step 1.
and release both
6
will be changed.
.
to
9
switches
2
. Then press the
4
can also
22
GB/IE/NI
by
2
23