Start-Up/Commissioning; Connecting The Compressed Gas Cylinder (Co Cylinder) - Grunbeck SODA JET III Premium Operation Manual

6

Start-up/Commissioning

The work below must be carried out by qualified specialists only.
Recommendation: The initial start-up/commissioning of the product should be carried out
by Grünbeck's technical service personnel.
6.1 Connecting the compressed gas cylinder (CO
Obey the operating instructions for handling compressed gas cylinders.
Designation
1 CO outlet (secondary pressure gas line)
2
2 CO pressure reducer
2
1. Unlock and open the door.
2. Press and hold the program button and at the same time select the Setting
program (refer to chapter 7.2.1).
3. Place the CO
holder using the safety chain.
4. Screw the union nut (with inserted sealing ring) of the CO
connection of the CO
» The CO
cylinder on the right next to the housing and secure it at the cylinder
2
cylinder.
2
outlet points downwards.
2
Start-up/Commissioning
cylinder)
2
Designation
3 Safety chain
4 CO cylinder
2
pressure reducer to the
2
25 | 92