Slashed Zero - Compuprint SP40 User Manual

Setup Parameter
LINE MODE
WRAP MODE

SLASHED ZERO

PRINT DIRECTION
EJECT ON FF
RESET WITH EJECT
Values Description
LF=LF, CR=CR If the printer receives a LF code (LF), it only performs a line feed. If
the printer receives a CR code (CR), it only performs a carriage
return.
CR=LF+CR If the printer receives a CR code (CR), it performs a carriage return
follow ed by a line feed. If the printer receives a LF code (LF), it
performs a line feed.
LF=LF+CR If the printer receives a LF code (LF), it performs a line feed
follow ed by a carriage return. If the printer receives a CR code
(CR), it only performs a carriage return.
LF&CR=LF+CR If the printer receives a LF code (LF) or a CR code (CR), it
performs both a line feed and a carriage return.
truncate, The data exceeding the line length are truncated (
autow rap printed on the follow ing line (
no, yes Selects the printing character for zero, w ith a slash (
w ithout (
unidir., bidir., sw Selects the printing direction of the print head: unidirectional
control (
unidir
control
no, yes Performs a form feed according to the selected page format (
or ejects a cut sheet loaded into the printer (
no, yes When the printer receives a reset command, if this item is set to
yes
).
no
.), bidirectional (
bidir
).
the paper inserted in the printer is ejected. If the item is set to
41
truncate
).
autowrap
.) or selected via softw are (
).
yes
) or
) or
yes
sw
)
no