Compuprint SP40 User Manual page 37

Setup Parameter
INTERFACE TYPE
HONOR CTS
INPUT BUFFER
IGNORE PE
AUTOFEED SIGNAL
SLCT-IN SIGNAL
BUFFER CONTROL
Values
parallel, serial,
financial, automatic
no, yes
1 Kb, 8 Kb, 16 Kb, 32
Kb, 64 Kb
enabled, disabled
disabled, enabled
disabled, enabled
DTR+SRTS, SRTS,
XON/XOFF, ETX/ACK,
Description
Selects the interface type. Selecting '
interface type is selected betw een serial and parallel by the
printer depending on data coming from host.
The 'financial' interface should be selected for typical
applications of the IBM4722 and IBM 9068 protocol w ith the
controlled link required by the IBM financial driver. When this
item is set, the parallel port is disabled.
This setting is significant only if the 'financial' interface has
been selected.
Considers ( ) or ignores (
yes
host for the control of the data stream from host.
Selects the buffer size.
When the 'financial' interface is selected, this setting is ignored.
Selects w hether the printer signals the paper empty condition
( ) or not (
disabled enabled
The parallel interface uses (
( ) the AUTOFEED signal.
disabled
The parallel interface uses (
( ) the SELECT-IN signal.
disabled
Selection of the buffer protocol. When the 'financial' interface
is selected, this setting is ignored.
33
automatic'
) the CTS signal received from
no
) on the busy line.
) or does not use
enabled
) or does not use
enabled
the