Setup Parameters - Compuprint SP40 User Manual

S e t u p P a r a m
S e t u p P a r a m
The following is a listing of the setup parameters.
Configuration Sheet
Setup Parameter
RESTORE TO MFG
PROGRAM
ERROR BUZZER
JOB BUZZER
e t e r s
e t e r s
Values Description
no The selected values are not set to factory defaults.
all The values set in all printer setups are reset to factory default
values.
config
The values set in the configuration setup are reset to factory default
values.
prog. 1,
prog. 2 The values set in the corresponding program setup are reset to the
factory default values.
progr. 1, Defines the default Program Setup. Selecting
progr. 2,
progr.2
on interface Setup are set.
Selecting
settings w ith the data arriving on the Centronics interface, and the
Program 2 settings w ith the data it receives from the serial interface.
When changing from one interface to the other, the default values
are set for the corresponding Program Setup.
enable, disable Enables or disables the buzzer in case of an error.
no beep, Selects the behavior of the buzzer w hen a new print job starts: no
the setup parameters set in the corresponding Program
the printer matches the Program 1
on interface
31
or
progr.1