Notification Of Power Failure - Kessel Pumpfix-F 28100 S Installation And User Manual

7.2 Notification of power failure:

Notification Problem
The Pumpfix
The ʻALARMʼ LED
blinks every two power (has been disconnected or a
seconds and alarm power failure has occurred).
sounds.
All LEDs are out. The Pumpfix
power for over 8 hours.
7. Problem notification
F is not receiving
® Reconnect to a suitable power supply
or wait for power failure to end.
® F has not received Reconnect the Pumpfix
a functioning power source.
17
Solution
® F to
Tips
The pump of the Pumpfix
®
F will not operate without
full outlet power! The
audible alarm will sound for
8 hours after the power has
failed and then the
Pumpfix ® F will go into
ʻSleep Modeʼ where all the
LEDs will go out.
During this notification, the
Pumpfix ® F is in ʻSleep
Modeʼ.