Table of Contents
Advertisement
Available languages
Available languages
1. Do not discard water tank magnets and plastic rivets. Otherwise, the machine will not
automatically stop working when the water tank is full, and the condensed water will overflow and
damage the floor of the room.
2. Please be sure to clean the condensed water in the water tank before resetting the working
mode of the machine.
3. If the water tank is dirty, rinse it with clean water. Avoid using detergents, steel balls, chemical
dust removers, diesel oil, benzene, diluents or other solvents. Otherwise, the water tank will be
damaged and leak
4.
Replace the empty tank back into the unit.
Otherwise, the water full indicator may remain red
and the machine cannot restart.
CONTINUOUS DRAINING
For continuous operation or unattended dehumidification, please connect the attached drain hose
to the unit. Condensate water can be automatically flow into a bucket or drain by gravity.
1.Straighten the drainage pipe
2.Insert one end of the drain into the drain into the cistern hole and connect the other end to the
bathroom, outdoor or bucket like container, or the prescribed drainage area.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 821-017V90 and is the answer not in the manual?
Questions and answers
what setting do i put the de-humidifier on to dry laundry
The "Continuously drying mode" should be used on the HOMCOM 821-017V90 dehumidifier to dry laundry. In this mode, the machine runs continuously without allowing humidity adjustment.
This answer is automatically generated