[ X DISASSEMBLY PROCEDURE ]
[1] DISASSEMBLY PROCEDURE
X DISASSEMBLY PROCEDURE
1. Control box
1. Removing the control box cover
(1) Remove the three fixing screws on the cover
(A) to remove it.
2. Thermistor (Intake air)
1. Remove the control box cover according to the
procedure [1]-1.
(1) Pull out the thermistor holder (B) and thermis-
tor (C) on the control box.
HWE1909A
Exercise caution when removing heavy parts.
Fixing screws
Fig. 1
Fig. 2
(B), (C)
Fig. 3
- 45 -
(A)
GB