Drain Pan - Mitsubishi Electric Mr.SLIM SFZ Series Technical & Service Manual

[ X DISASSEMBLY PROCEDURE ]

3. Drain pan

1. Remove the control box cover (A) with proce-
dure [1]-1.
2. Remove the fixing screws on the front plate (D),
(E) to remove it. (Fig. 4)
3. Remove the fixing screws on the control box
(F) to remove it. (Fig. 5)
4. Removing the drain pan
(1) Drain the water out of the drain pan before
removing it.
(2) Pull out the drain pan in the direction of the
arrow. (Fig. 6)
Note:
• To avoid dew condensation, use insulated
screws in the places marked with circles in Fig. 7.
HWE1909A
Exercise caution when removing heavy parts.
(E)
Fig. 4
Fig. 5
(a) Drain pan
Fig. 6
(a) Insulation material
Fig. 7
(D)
- 46 -
(D)
(F)
(a)
(a)
GB