Mitsubishi Electric Mr.SLIM SFZ Series Technical & Service Manual page 16

[ II PART NAMES AND FUNCTIONS ]
Main menu Setting items
Energy Energy
saving saving
Energy data (for unit
time, month, and
day)
Initial Basic
setting setting
Display
setting
Service Initialize remote
controller
Remote controller
information
Maintenance Error information
Filter information
HWE1909A
Schedule Set the start/stop times to operate the units in the energy-save
mode for each day of the week, and set the energy-saving rate.
• Up to four energy-save operation patterns can be set for each day.
• Time can be set in 5-minute increments.
• Energy-saving rate can be set to a value from 0% and 50 to 90%
in 10% increments.
* Clock setting is required.
Displays the amount of power consumption during operation.
• Unit time data: Data for the last one-month period can be
displayed in 30-minute units.
• Monthly/daily data: Data for the last 14-month period are
displayed in day- and month-units.
* Data can be deleted.
* Data are obtained based on the power consumption estimated
from the operating state.
Clock Use to set the current time.
Daylight Sets the daylight saving time.
saving
time
Main Use to switch between "Full" and "Basic" modes for the Status
display display and the Main display.
• The default setting is "Full."
Black and Use to invert the colors of the display, turning white
white background to black and black characters to white.
inversion
setting
Contrast Use to adjust screen contrast and brightness.
•
Brightness
Language Use to select the desired language.
selection
Use to initialize the remote controller to the factory shipment
status.
Use to display the remote controller model name, software
version, and serial number.
Use to check error information when an error occurs.
• Error code, error source, refrigerant address, unit model,
manufacturing number, contact information (dealer's phone
number) can be displayed.
* The unit model, manufacturing number, and contact information
need to be registered in advance to be displayed.
Use to check the filter status.
• The filter sign can be reset.
Setting details
- 13 -
GB