Installing Your Cooker - Belling 644 Installation And User Instructions Manual

Electric slot-in cookers
Table of Contents

Advertisement

Cleaning
Accessories
Siting/Moving
the Cooker
Levelling
4

Installing your cooker

Belling provide a range of cleaning materials for your new cooker.
Please call 01709 579907.
You can upgrade your product using our 'Smoothglide' system for easier
food removal. The following parts are available - Please call 01709 579907
for further details.
Grill Compartment Smoothglide System: Part number Belling 027
Main Fan Oven Smoothglide System: Part number Belling 028
Kebab Rack for Grill Compartment: Part number Belling 029
Your cooker is heavy, so be careful when moving or positioning it. Do not
try to move the cooker by pulling on the doors or handles. The Belling
Format is designed to fit between 600mm deep cabinets, spaced a
minimum of 600mm apart. It can also be used freestanding, with a cabinet
to one side, in an angled corner setting or with its back to a wall.
Never mount the cooker onto a platform.
To protect from overheating, adjacent side walls which project above hob
level must not be nearer to the cooker than 150mm (6") Any overhanging
surface or cooker hood should be at least 650mm (25
hob. We do not recommend positioning the cooker below wall cupboards,
as the heat and steam from the cooker may cause damage to the cupboard
and its contents.
Whatever the position, remember to leave enough room for the cooker to
be pulled out for cleaning and service.
Movement of your cooker is most easily achieved by lifting the front as
follows. Open the Grill/Oven door sufficiently to allow a comfortable grip
on the underside front edge of the oven roof, avoiding any grill elements
or oven interior furniture. Also taking care not to damage floor coverings.
Two rear wheels and two front feet are fitted which can be adjusted up or
down to set the height (900mm - 915mm) and level the cooker.
1.
The rear wheels can be raised or lowered from the BACK of the
cooker by adjusting the levelling screws 'A' in the plinth.
2.
The front feet can be simply screwed in or out to lower or raise the
front of the cooker.
CAUTION: Some soft floor coverings may get damaged if the cooker is not
moved carefully.
VIEWED FROM REAR
1
/
") above the cooker
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

645646h647652653h657h

Table of Contents