Table of Contents
Advertisement
Wheels and Tires
The wheels of your scooter have split rims. This allows any punctures to be repaired easily.
To change the wheels remove the 5 x hex head 6mm and slide the wheel off its axle hub.
When changing a tire you must deflate the tire first. Remove the five bolts to split the rim to
separate the rim. Ensure that when refitting the wheel complete in the reverse order making
sure you do not miss any bolts. Tire pressure is recommended to be kept at 30 psi on the
rear tires and 25 psi on the front. Note when refitting the tube a small amount of air in the
tube will prevent the tube from pinching when reassembling the split rim.
Caution: On the tire it states maximum tire pressure is 50psi. This is a maximum tire
pressure and the tires should never be inflated to this pressure.
Attention: Tires should be maintained at the correct pressure noted above to ensure
even wear and ride comfort.
17
Advertisement
Table of Contents
