Maintenance And Cleaning - Beko 71261 AL Owner's Manual

Maintenance and cleaning

Clean the product regularly to maintain optimal performance and to prevent possible
malfunctions.
Component Cleaning method
Air filter
Clean the surface of the indoor unit using a soft, dry cloth.
Clean the water drainage hose.
Indoor unit
Clean the water drainage tray where the condensation has gathered.
Clean the heat exchanger.
Replace the remote control batteries.
Use steam to clean the heat exchanger coils and panel holes.
(Consult with the authorized service) (
Outdoor unit
Clean the fan.
Clean the water drainage hose.
The annual maintenance you will have in our Authorized Service expands the
service life of the air conditioner and makes it more efficient.
Before starting cleaning or maintenance, de-energize the product.
Do not clean the air conditioner with water. There is a risk of electrocution.
Always check for refrigerant leakage after installation or maintenance of the
product.
Use a firm stool or ladder when cleaning or maintaining the product.
Us a soft cloth for cleaning. Do not use harsh detergents, solvents, etc.
Install the drain hose so that it shall allow proper draining of the water.
Do not touch the metal parts when removing the air filter. You may get injured.
Never clean the air conditioner's ionizer filter, controller or outer surface with hot
water above 40° C or with volatile substances such as thinner, acetone, benzine.
The exterior surface of the air conditioner and the remote control may be damaged.
At the end of the season, remove the batteries from the remote control. If you are
not going to use the A/C for a long time, cover the outdoor unit of the air
conditioner with a weatherproof cover.
Air filter
)
28
Cleaning interval
Periodically
4 month
Once a year
Once a year
Once a year
Periodically
Once a year
Once a year