Cleaning And Maintenance; Service Life; Installation And Maintenance Of Healthy Filter; Installation Instructions - Beko BK 2600 User Manual

Installation and Maintenance of Healthy Filter

1. Forcibly pull the panel for a specific angle
from the two ends of the front panel according
to the arrow direction. Then pull the air filter
downwards to remove it. (See Fig.a)
2. Mount the healthy filter onto the air filter,(as
shown in Fig.b). If the air filter cannot be in-
stalled, please mount the healthy filter on
the front case. (as shown in Fig.c)
3. Mount the air filter properly along the arrow
direction in Fig.d, and then close the panel cover.
Take out the healthy filter before cleaning and reinstall it after cleaning
according to the installation instruction. Pay special attention to that silver
ion filter can't be cleaned with water, while active carbon, photocatalyst,
low temperature conversion (LTC) catalyst, formaldehyde eliminator, ca-
techin or mite killing filter can, but can't with brush or hard things. Dry it in
the shade or sun after cleaning, but not by wiping.
The healthy filter commonly has its usage lifetime for one year under
normal condition. As for silver ion filter, it is invalid when its surface becomes
black (green).
This supplementary instruction is provided for reference to the unit with
healthy filter. If the graphics provided herein is different from the physical
goods, the latter one shall prevail. The quantity of healthy filters shall be
based on the actual delivery.

Installation Instructions

Cleaning and Maintenance

Service Life

24
Fig. a
Fig. b
Air filter
Healthy filter
Fig. c
Healthy filter
Fig. d