Operating The Product; Turning The A/C On; Operating Modes; Mode Selection - Beko 71261 AL Owner's Manual

5

Operating the product

Turning the A/C on

1. If the automatic fuse of the A/C is off,
switch it on.
2. Direct the remote controller to the
Operation status display on the
indoor unit and press the "
on the controller. The operating
status indicator display on the front
panel illuminates and a warning signal
comes from the air conditioner.
3.
Select the desired mode using the
remote control.

Operating modes

The air conditioner can be operated in
5 different operating modes.
Cooling mode (
It is used to provide cooling at desired
temperature and conditions.
Heating mode (
It is used to provide heating at desired
temperature and conditions.
Auto-operation mode (
Depending on the set temperature,
the air conditioner operates
automatically in heating or cooling
mode. The air conditioner is used to
automatically control the fan speed
and temperature by detecting the
room temperature.
Dehumidifying mode (
It is used to reduce humidity without
the overcooling of the environment
where the temperature is relatively low
but the humidity is high.
Fan mode (Fan /
It circulates the air without changing
the room temperature.

Mode selection

Press the "Mode" button
remote control. Each time you
press the button, the mode will
change and switch to Auto
Operation, Dehumidification,
and Fan modes respectively.
Select one of the operating modes.
" button
)
)
/
/ )
/ )
on the
Use the "
to set the room temperature and the
"
speed.
Cooling of the room (
Cools the room with comfortable air current.
To operate the product, press the "
1.
button
Press the "Cool" button (
to cooling mode.
"Cooling" symbol will be displayed on
the screen.
Controller display
)
Press the "
the desired temperature. Each time you
press the button, the set room
temperature will increase or decrease
by 1° C. - The temperature range is
between 18° and 30° C.
You can change the desired fan speed.
4.
See "Fan speed adjustment"
Set the temperature value on the
remote control display to a value below
the room temperature.
If the A/C operates continuously for a
long time in cooling mode, condensa-
tion may form on the front panel and
the horizontal flaps.

Rapid cooling function

Allows the room to cool rapidly.
To operate the product, press the "
button.
16
Auto-operation mode
Dehumidifying mode
Fan mode
" buttons on the controller
" button to adjust the fan
A/C indicator
" buttons until you reach
)
"
) to switch
s s "