Care And Maintenance; Cleaning Your Indoor Unit; Cleaning Your Air Filter - Beko BEEPG 090 User Manual

3

Care and maintenance

3.1 Cleaning your indoor unit

Before cleaning or
maintenance:
Always turn off your air
A
conditioner system and
disconnect its power
supply before cleaning or
maintenance.
Warning:
Only use a soft, dry cloth to
wipe the unit clean. If the unit is
especially dirty, you can use a
cloth soaked in warm water to
wipe it clean.
• Do not use chemicals or
chemically treated cloths to
A
clean the unit.
• Do not use benzene, paint
thinner, polishing powder or
other solvents to clean the unit.
They can cause the plastic
surface to crack or deform.
• Do not use water hotter than
40°C (104°F) to clean the front
panel. This can cause the
panel to deform or become
discolored.
Split type air conditioner / User Manual
3.2

Cleaning your air filter

A clogged air conditioner can reduce the cooling
efficiency of your unit, and can also be bad for
your health. Make sure to clean the filter once
every two weeks.
1. Lift the front panel of the indoor unit.
2. First press the tab on the end of filter to
loosen the buckle, lift it up, then pull it towards
yourself.
3. Now pull the filter out
4. If your filter has a small air freshening filter,
unclip it from the larger filter. Clean this air
freshening filter with a hand-held vacuum.
5. Clean the large air filter with warm, soapy
water. Be sure to use a mild detergent.
6. Rinse the filter with fresh water, then shake off
excess water.
7. Dry it in a cool, dry place, and refrain from
exposing it to direct sunlight.
8. When dry, re-clip the air freshening filter to the
larger filter, then slide it back into the indoor
unit.
9. Close the front panel of the indoor unit.
21 / 200 EN