Important Safety Instructions; General Safety - Beko 71261 AL Owner's Manual

2

Important safety instructions

This section includes the safety instructions
necessary to prevent the risk of personal
injury or material damage. Failure to observe
these instructions shall void any and all
warranties.

General safety

Avoid exposure to the air flow on your
body for a long period of time.
Set the product to the best tempera-
ture as per the ambient conditions and
the health conditions.
Do not drink water drained from the
appliance. Otherwise, you may face
serious health problems.
Do not operate the product in non-ven-
tilated areas for a long period of time.
Ventilate the environment while
operating the product together with
other appliances such as stoves, etc.
Wait for 3 minutes to operate the
product after turning it off. The fuse in
your installation may blow.
Do not operate your product for a long
time if the humidity is too high or if a
door or a window is open.
Plug the product in a grounded
electrical installation protected by a
fuse conforming to the values specified
in the "Technical Specifications" chart.
Always have an authorized electrician
install the grounding equipment for
operation either with or without
transformer. Our company shall not be
responsible for the damages that shall
be incurred due to using the product
without grounding according to local
regulations.
Make sure that the mains voltage is
proper for the product.
Use a delayed-type (C-type) automatic
fuse according to the product model.
Do not damage the cooling circuit
where refrigerant circulates through the
product, using cutting or piercing tools.
The refrigerant gas that may spray out
in case of puncturing in the gas
channels of the heat exchanger, upper
surface coatings on pipe extensions
may cause skin irritation and eye
injuries.
Do not cover or block the air inlet-out-
let vents and outdoor unit with any
object while the product is operating.
Do not spray flammable or cooling
gases directly to the product.
Do not insert your hand or any other
object into the air inlet-outlet vents on
the indoor and outdoor units while the
product is operating.
Internal fans can cause serious injuries.
Do not open up the front panel while it
is being operated. Do not touch the
Neo Plasma filter, if present in the
product.
If the product leaks refrigerant, open
the windows to ventilate the room and
call the Authorized Service.
Shut off the gas flow and turn off the
A/C in case of a flammable gas leak in
the environment of the product. Do not
operate the A/C again without ventilat-
ing the environment properly.
Do not place heating devices near the
product and the power cable. Exces-
sive heat from these devices can cause
melting of the plastic parts of the
product.
De-energise using the automatic fuse
during power outages or in the event of
a storm. Failure to comply with this
instruction may cause fire or electrocu-
tion.
Make sure that the power cable or its
plug (if any) is not detached or broken.
Failure to comply with this instruction
may cause electric shock or damage
to the product.
Do not touch, operate, repair the A/C
with wet hands. Failure to comply with
this instruction may cause electric
shock or damage to the product.
If power cord is damaged, do not
operate the product. Contact the
authorized service.
Do not pull and strain the power cord
of the product. Any damage to the
cord may cause an electric shock.
8