Table of Contents
Advertisement
3
Care and maintenance
3.1 Cleaning your indoor
unit
Before cleaning or
maintenance:
Always turn off your air
A
conditioner system and
disconnect its power
supply before cleaning or
maintenance.
Warning:
Only use a soft, dry cloth to
wipe the unit clean. If the
unit is especially dirty, you
can use a cloth soaked in
warm water to wipe it clean.
• Do not use chemicals or
chemically treated cloths
to clean the unit.
A
• Do not use benzene,
paint thinner, polishing
powder or other solvents
to clean the unit. They can
cause the plastic surface
to crack or deform.
• Do not use water hotter
than 40°C (104°F) to
clean the front panel.
This can cause the panel
to deform or become
discolored.
Split type air conditioner / User Manual
3.2
Cleaning your air filter
A clogged air conditioner can reduce the cooling
efficiency of your unit, and can also be bad for
your health. Make sure to clean the filter once
every two weeks.
1. Lift the front panel of the indoor unit.
2. First press the tab on the end of filter to
loosen the buckle, lift it up, then pull it towards
yourself.
3. Now pull the filter out
4. If your filter has a small air freshening filter,
unclip it from the larger filter. Clean this air
freshening filter with a hand-held vacuum.
5. Clean the large air filter with warm, soapy
water. Be sure to use a mild detergent.
6. Rinse the filter with fresh water, then shake
off excess water.
7. Dry it in a cool, dry place, and refrain from
exposing it to direct sunlight.
8. When dry, re-clip the air freshening filter to
the larger filter, then slide it back into the
indoor unit.
9. Close the front panel of the indoor unit.
21 / EN
Advertisement
Table of Contents
