Installing The 12-V Battery - KTM 890 ADVENTURE R 2023 Manual

Table of Contents

Advertisement

16 ELECTRICAL SYSTEM
16.3
132

Installing the 12-V battery

Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
Keep 12 V batteries out of the reach of children.
Wear suitable protective clothing and safety glasses.
Avoid contact with battery acid and battery gases.
Keep sparks or open flames away from the 12 V battery.
Only charge 12 V batteries in well-ventilated rooms.
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
Rinse eyes with water for at least 15 minutes and consult a doctor immediately if battery acid and
battery gases get into the eyes.
Caution
Danger of accidents Electronic components and safety devices will be damaged if the 12-V battery is dis-
charged or missing.
If the 12-V battery is discharged or defective, malfunctions in the vehicle electronics can occur, espe-
cially when starting.
Never operate the vehicle with a discharged 12-V battery or without a 12-V battery.
F03303-10
Main work
Position the 12-V battery in the battery compartment.
12-V battery (HTZ12A-BS) (
The battery terminals face opposite the direction of travel.
1
Connect positive cable
Guideline
Screw, battery termi-
nal
Mount positive terminal cover
3
Connect negative cable
Guideline
Screw, battery termi-
nal
p. 161)
to the 12-V battery.
M6
4.5 Nm
(3.32 lbf ft)
2
.
to the 12 V battery.
M6
4.5 Nm
(3.32 lbf ft)

Advertisement

Table of Contents
loading

This manual is also suitable for:

3214754en

Table of Contents