Table of Contents
Advertisement
7.25
Quick Selector 2 display
7.26
Navigation display
7.27
Call display
When the menu is closed, the Quick Selector 2 display is opened
by pressing the DOWN button.
Press the BACK button to close the Quick Selector 2 display.
Info
The Quick Selector 2 display can be configured in
the Settings menu under Quick Selector 2. Any information
can be selected.
I00232-01
The Navigation indicator appears when the navigation function is
activated.
In the Navigation display, the direction arrow, the distance from
the destination, the estimated arrival time of the cellphone, the
distance to the next waypoint, and the street name are displayed.
The Navigation display can be switched on or off in the Naviga-
tion submenu.
I00209-01
Warning
Danger of accidents Headphone volume which is too high
distracts attention from traffic activity.
–
Always select headphone volume which is low enough
for you to still clearly hear acoustic signals.
The Call indicator appears for incoming or active calls.
Press the SET button to accept an incoming call.
I00210-01
Press the BACK button to reject an incoming call.
Press the UP button to increase the audio volume.
Press the DOWN button to reduce the audio volume.
Info
It is not possible to change the audio volume using the
combination switch with every cellphone.
The call duration and contact are displayed. Depending on
the cellphone settings, the contact is shown by name.
You cannot navigate in the menu during an active phone
conversation.
COMBINATION INSTRUMENT 7
43
Advertisement
Table of Contents
