Table of Contents
Advertisement
15.5
Checking the rear hub damping rubber pieces
Info
The engine power is transmitted from the rear sprocket to the rear wheel via the 6 damping rubber pieces.
They eventually wear out during operation. If the damping rubber pieces are not changed in time, the rear
sprocket carrier and the rear hub will be damaged.
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
Finishing work
–
Check the chain tension. (
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 94)
Preparatory work
–
Raise motorcycle with rear lifting gear. (
–
Remove the rear wheel.
Main work
–
Check bearing
»
If the bearing is damaged or worn:
–
Change the bearing of the rear sprocket carrier.
–
Check damping rubber pieces
and wear.
»
If the damping rubber pieces of the rear hub are damaged
or worn:
–
Change all the damping rubber pieces of the rear hub.
F02073-10
–
Lay the rear wheel on a workbench with the rear sprocket fac-
ing upwards and insert the wheel spindle in the hub.
–
To check play
rear sprocket with your hand.
Info
Measure the play on the outside of the rear sprocket.
Play of damping rubber
F02074-10
pieces on rear wheel
»
If clearance
–
Change all the damping rubber pieces of the rear
hub.
Finishing work
–
Install the rear wheel.
–
Check the chain tension. (
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 94)
p. 97)
p. 94)
(
p. 122)
1
.
2
of the rear hub for damage
A
, hold the rear wheel tight and try to turn the
≤ 5 mm (≤ 0.2 in)
A
is larger than the specified value:
(
p. 123)
p. 97)
WHEELS, TIRES 15
125
Advertisement
Table of Contents
