Table of Contents
Advertisement
Controls, LEDs, and Connectors
3.3.3
Connectors
This section describes the pin assignments and signals for the connectors on the MVME7100.
The next table lists the standard connectors on the MVME7100 baseboard. Refer to
on page 47
for connector locations. Pin assignments for the connectors are in the following
sections. Some connectors use standard pin assignments in compliance with the VMEbus,
IEEE, PCI, and ANSI/VITA specifications. Links to these specifications are located at
B, Related Specifications, on page
Table 3-2 Baseboard Connectors
Reference
Designator
J6
J4A
J4B
J11, J12, J13, J14
J21, J22, J23
J1
P1
P2
J2
P4
P5
50
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
103.
Function
XMC Expansion
TSEC 1, 10/100/1000 Ethernet
TSEC 2, 10/100/1000 Ethernet
PMC1
PMC2
Port 0. Serial Port 1
VME five-row P1
VME five-row P2 on SBC and
RTM
USB
Processor COP header
Boundary Scan header
MVME7100 Single Board Computer Installation and Use (6806800E08A)
Notes
8X PCI-E to XMCSpan
RJ-45
RJ-45
Implementing all recommended and
optional VITA32 signals except
RESETOUT#
Mini DB-9 console serial port
TSEC3 signals assigned to E1-1 thru
E1-4
TSEC4 signals assigned to E2-1 thru
E2-4
Serial ports 2-5
Single channel upright USB connector.
USB1 on front
Connectors
Figure 3-1
Appendix
Advertisement
Table of Contents
