Features; Seeprom Address Switch, S1; Table 5-1 Transition Module Features; Figure 4-1 Block Diagram - Emerson MVME7100-0173 Additional Information For The Installation And Use

Transition Module
5.3

Features

The MVME7216E transition module is for I/O routing through the rear of a compact VMEbus
chassis. It connects directly to the VME backplane in chassis' with an 80 mm deep rear
transition area. The MVME7216E is designed for use with the host MVME7100 board. It has
these features:

Table 5-1 Transition Module Features

Function
I/O
Figure 5-2 Block Diagram
I2C Bus
VPD
8 KB
PMC 1 Jn4 IO
PIM IO
5.4

SEEPROM Address Switch, S1

A 4-position SMT configuration switch is located on the MVME7216E transition module to set
the device address of the RTM serial EEPROM device. The switch settings are defined in the
next table. To see switch location, refer to
Figure 5-3 S1 Switch Positions
ON
1
2
76
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Features
One five-row P2 backplane connector for serial and Ethernet I/O passed from the SBC
Four RJ-45 connectors for rear panel I/O: four asynchronous serial channels
Two RJ-45 connectors with integrated LEDs for rear panel I/O: two 10/100/1000
Ethernet channels
One PIM site with rear panel I/O
P2
GigE 2
PIM
3 4
MVME7100 Single Board Computer Installation and Use (6806800E08A)
Serial Port 2
Serial Port 3
Serial Port 4
GigE 1
GigE Serial
GigE Serial
RJ-45 RJ-45
RJ-45 RJ-45
Rear Panel
Figure 5-1 on page 75.
Features
Serial Port 1
Serial Serial
RJ-45 RJ-45