Emerson MVME7100-0173 Additional Information For The Installation And Use page 16

Conventions
The following table describes the conventions used throughout this manual.
Notation
0x00000000
0b0000
bold
Screen
Courier + Bold
Reference
File > Exit
<text>
[text]
...
.
.
.
..
|
MVME7100 Single Board Computer Installation and Use (6806800E08A)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description
Typical notation for hexadecimal numbers
(digits are 0 through F), for example used for
addresses and offsets
Same for binary numbers (digits are 0 and 1)
Used to emphasize a word
Used for on-screen output and code related
elements or commands in body text
Used to characterize user input and to
separate it from system output
Used for references and for table and figure
descriptions
Notation for selecting a submenu
Notation for variables and keys
Notation for software buttons to click on the
screen and parameter description
Repeated item for example node 1, node 2,
..., node 12
Omission of information from
example/command that is not necessary at
the time being
Ranges, for example: 0..4 means one of the
integers 0,1,2,3, and 4 (used in registers)
Logical OR
Indicates a hazardous situation which, if not
avoided, could result in death or serious
injury
Indicates a hazardous situation which, if not
avoided, may result in minor or moderate
injury
Indicates a property damage message
No danger encountered. Pay attention to
important information
About this Manual
15