Advertisement
ProMARK X
FILES AVAIL display if no attribute files have been made active. The
receiver displays the INPUT NEW ATTRibute screen. Key in an attribute
up to 72 characters (16 displayable at a time). Press ENTER. This
attribute is now written to the top of the data file and the receiver returns
you to the ATTRIBUTE display.
You may input as many attributes as you like before and during
logging. Attributes entered before logging are put at the head
of the file. Attributes entered during logging are inserted into
the data file, paired with the fix computed at the time the
Upon pressing ENTER to conclude attri-
bution, the receiver displays the START
LOGGING screen. Note that attributes
are assigned at the start of a session for
static applications. Mobile applications,
allow for attribution both at the start of
a session and throughout the session.
Press ENTER to begin logging data.
The receiver will display the STOP LOG-
GING screen. Again, as in DIF3 and 4,
you can use the RIGHT ARROW to view
the file status screen and the receiver
status screen. If you wish to end the
session, press ENTER. Mobile DIF gives
you the utility to tag data as it is being
collected with attributes during a differ-
ential session. To assign attributes, press
the DOWN ARROW or ATR key.
NOTE
attribute was entered.
Differential
TO START MOBILE
LOGGING PRESS
ENTER
TO STOP SESSION
PRESS ENTER
00:00 TOTAL
~!
7-15
Advertisement
Chapters
