Advertisement
ProMARK X
Upon pressing ENTER, the receiver dis-
plays the descriptor screen. You can
enter any type of descriptive informa-
tion you wish regarding the file (for
example time, date, place, weather, etc.).
This can be helpful in keeping files sepa-
rate if many are collected in a short
period of time. Key in the descriptor up
to 72 characters and press ENTER. You
may also press ENTER without entering
anything to have no descriptor.
The receiver now displays the Data Sam-
pling Rate screen. You can either accept
the data sampling rates displayed or key
in a new data sampling rate for both
POSition data and RAW data. To enter
a new data sampling rate, key in the
number desired followed by ENTER.
Do this first for the POSITION data and
then for the RAW data. To change
POSITION only, key in the new number
and press ENTER. Now re-enter the raw
data rate followed by ENTER. To accept
the displayed setting, simply press EN-
TER.
Upon pressing ENTER, the receiver dis-
plays the START AVERAGING screen.
To start averaging, press ENTER.
Upon pressing ENTER, the receiver dis-
plays the AVERAGING screen. The num-
ber of fixes to be averaged will count off
in the lower left corner. The standard
deviation of horizontal position varia-
tion is also displayed in the lower right
(S=) and is updated as each fix is com-
puted.
Differential
DESCRIPTOR:
PRESS ENTER
DATA SAMPLE RATE
POSITION:
RAW DATA:
START AVERAGING
PRESS ENTER
AVERAGING
WAIT
(0001)
s= 00 m
1 sec
1 sec
3D
7-3
Advertisement
Chapters
