Advertisement
ProMARK X
The external power jack is located on the right side of the unit, opposite the
antenna. Insert the 8-pin connector of the adapter into the power jack.
The power lost message appears when the level of external power being
supplied to the unit is below minimum requirements. The unit is operating
on battery power. If no key is pressed within two minutes the unit will turn
off.
The Keys
The ProMARK X has three types of keys: function keys, operation keys, and
alphanumeric keys. The function keys are the eight center keys at the top of
the unit. These keys are used to access the unit's functions and to select non-
default operating parameters. The operation keys are the four keys in the
corners of the top keypad, plus the ENTER and CLEAR keys at the bottom of
the alphanumeric keypad. They are used to turn the unit and display light
on and off, to scroll through information displays, to turn options on and off,
and to save or delete information. The alphanumeric keys are used to input
information and are generally used in conjunction with the function keys.
Detailed information relating to specific keys are found in following chapters.
Function
Keys
Operation
Keys
POS
LIGHT
ON/OFF
WPT
NAV
SETUP
DIF
ROUTE
ATTR
AUX
M A G E L L A N
M A G E L L A N
1
2
3
4
5
6
7
8
9
0
Key Placement
Getting Started
Operation
Keys
Operation
Keys
Alphanumeric
Keys
2-5
Advertisement
Chapters
