Advertisement
Differential
The receiver will display a descriptor
screen. You may enter any type of
descriptive information you wish regard-
ing the file (for example, time, date,
place, weather, etc.). This can be help-
ful in keeping files separate if many are
collected in a short period of time. Key
in the descriptor up to 72 characters and
press ENTER. You may also press EN-
TER without entering anything to have
no descriptor.
If you prefer, you may use a waypoint
instead of a descriptor. Press the DOWN
ARROW to scroll through the stored
waypoints, or key in the desired filename
followed by ENTER. Press ENTER when
the desired waypoint is displayed to
return to the previous display, and EN-
TER again to continue.
Upon pressing ENTER, the receiver dis-
plays the Data Sampling Rate screen.
You can either accept the data sampling
rates displayed or key in a new sampling
rate for both Position data and Raw
data. To enter a new data sampling
rate, key in the number you want fol
lowed by ENTER. Do this first for POSition and then for RAW data. To
change POSITION only, key in the new number and press ENTER. Now
re-enter the RAW data rate followed by ENTER. To change RAW data
rate only, re-enter Position rate and press ENTER, then key in new Raw
data rate followed by ENTER. To accept the displayed sampling rates,
simply press ENTER. Note that you can also enter new sampling rates by
pressing CLEAR to clear the individual sampling rates, then keying in new
rates.
The receiver will now display the At-
tribute screen. If an attribute file has
been made active (refer to Attribute
chapter), you can use the RIGHT AR-
ROW to toggle through the active at-
tributes (up to 99).
7-8
ProMARK X
DESCRIPTOR:
_
PRESS ENTER
W001 34`06.5895N
117`49.5899W
234m ALT
DATA SAMPLE RATE
POSITION:
RAW DATA:
ATTRIBUTE:
DONE
PRESS ENTER
!
~!
1 SEC
1 SEC
00
!
Advertisement
Chapters
