Advertisement
Differential
Once a session is stopped, you may start another function or immediately
begin another session.
To start another session using the same
parameters (descriptor, data sample rate,
and attribute file), press CLEAR. The
unit displays the Start Logging screen.
Press ENTER to start a new session, or
press CLEAR again to enter new at-
tributes.
DIF4, RTCM:
Press DIF, 4, and ENTER (or press DIF
and the DOWN ARROW four times
then, ENTER). Use the RIGHT ARROW
to toggle ON or OFF. In order to receive
RTCM corrections you must have the
receiver connected to a Differential Bea-
con Receiver (DBR) or a radio modem
device. Once you have connected your
receiver to a correction source, you can
toggle this option to ON.
If you see the message "PORT NOT SET" when accessing this
function, press ENTER to override the Port Setup (Setup 7) and
reasign a port to this function. Keep in mind that changes
"WAITING" is displayed until the unit
establishes a connection with the cor-
rection source.
7-18
that you make here will be relected in Setup 7.
TO START LOGGING
PRESS ENTER OR
CLR TO CONT ATTR
RECEIVE RTCM104
OFF
NOTE
RECEIVE RTCM104
ON
WAITING
ProMARK X
!
!
Advertisement
Chapters
