Danfoss 140F1080 Installation Manual page 8

2. Fasten the thermostat:
• Drive the screws through the holes in the bottom
corners of the thermostat.
• Seal the holes with the enclosed screw stopper to
maintain the density.
3. Connect the thermostat according to the connection
diagram.
• Heating: (L-main, N-main, L-load, NO (normally open)
- load).
• Cooling: (L-main, N-main, L-load, NC (normally closed)
- load).
8
D610
L N N NO NC
L
Mains
Max.Load
220-240V~
10 (1) A
N
IP44
-10T50
NTC
DEVIreg™ 610
Installation Guide