Huawei UPS2000-H Quick Manual page 46

Hide thumbs Also See for UPS2000-H:

Table of Contents

UPS2000-H-(6 kVA-10 kVA)

Quick Guide

Figure 1-57 Inserting the SNMP card into the optional card slot

Step 3 Connect one end of the network cable to the NETWORK port on the SNMP card

and the other end to the network port on the customer's device.

Step 4 Enter https://

language, and enter the correct User Name and Password. The default user name

is admin, and the preset password is Changeme.

Figure 1-58 Logging in to the WebUI

Step 5 Click Login. The home page is displayed.

Step 6 On the WebUI, choose System Settings > Comm. Settings and set the IP address

of the DNS server.

Step 7 Set and test domain name parameters.

Issue 03 (2023-08-20)

NO TE

M3 screws are used to install the optional card. The recommended torque is 0.5 N·m.

SNMP card IP address in the address box of the browser, select a

Choose System Settings > NMS Application > BIN > Communication

Parameters on the WebUI. Set parameters as follows:

1 Installation and Cable Connection

Table of Contents