Step 5.
Remove the materials that secure the manifolds to the carton, and remove the carton from the
manifolds.
Figure 58. Unpacking the manifolds
After this task is completed
Proceed to
"Fill the heat exchanger with water" on page
Replace a regular door with Rear Door Heat eXchanger for 48U
See this topic to learn how to replace a regular rear door with ThinkSystem Rear Door Heat eXchanger for
48U Rack.
Procedure
Step 1.
Extend each of the four leveling pads in turns until they firmly contact the floor and support the rack
cabinet. Make sure the cabinet is balanced by gently pushing the cabinet. If it tilts, adjust the length
of the leveling pads until the cabinet is well balanced.
73.
Chapter 3
.
51
Rack cabinet setup