Complete Setup Of Rear Door Heat Exchanger 48U That Comes With The Rack - Lenovo ThinkSystem Heavy Duty Full Depth 48U User Manual

See the instructions in the rack documentation before you install devices, remove devices, or relocate
the rack.
S038
CAUTION:
Eye protection should be worn for this procedure.
Complete setup of Rear Door Heat eXchanger 48U that comes with the
rack
See this topic to learn how to complete setup of ThinkSystem Rear Door Heat eXchanger for 48U Rack when
it comes already installed to the rack.
Procedure
Step 1. Remove the brackets that support the rear door heat exchanger.
Figure 54. Removing the supporting brackets
Step 2. Make sure that one specially trained person holds onto the rear door heat exchanger and guides
the rack down the ramp. The other specially trained persons must guide the rack down the ramp by
holding onto the rack frame. Slowly roll the rack down the ramp until the casters are on the floor.
Move the rack to the final location.
48
ThinkSystem Heavy Duty Full Depth 48U Rack Cabinet User Guide