Using The Ice And Water Dispenser - Insignia NS-RFD26XSS3 User Manual

Using the ice and water dispenser

1 Press Cubed or
selection.
2 Position your glass under the dispenser in the refrigerator door and press the lever with the glass.
Notes:
• The water coming into your refrigerator flows through the filter under increased pressure. When you dispense water, the pressure
decreases which makes bubbles. The water may temporarily look misty or cloudy. The bubbles disappear and the water clears in a
few seconds.
• The ice cubes generated by the rapid ice-making process will look white, which indicates they were generated normally.
• When you select Cubed ice, a small amount of crushed ice might be produced. When you select Crushed ice, a small amount of
cube ice might be produced.
Lever
To turn off the ice maker:
1 Press Ice Off to turn off the ice maker. The icon lights up when ice is turned off. Press again to turn ice maker back
on.
2 To remove all ice cubes from the bucket, hold the bottom of the bucket with one hand and the side of the bucket with
the other. Lift up on the ice bucket, then pull it straight out in the direction of the arrow.
If you leave the ice cubes in the bucket, the ice cubes may clump together making it difficult to remove them
Note:
26
Crushed to dispense ice, or press
www.insigniaproducts.com
Water to dispense water. The icon lights up to show your
.