Table of Contents
Advertisement
Removing and replacing the refrigerator doors (Optional)
If the opening to the installation area you chose is too narrow for your refrigerator to pass through, remove the doors and
drawers, then move your refrigerator sideways into the area.
WARNING: Electrical Shock Hazard
Disconnect your refrigerator from power before removing the doors. Reconnect the ground wire before operating. Failure to do so
could result in death or electric shock.
Removing the refrigerator doors
You need the following tools to remove the refrigerator doors:
Phillips screwdriver
Note: Do not remove the doors unless you have to.
1 Make sure that your refrigerator is unplugged.
2 With the refrigerator doors shut, use a Phillips screwdriver to remove the three screws that secure the hinge cover to
the top of your refrigerator, then remove the hinge cover with attached entire harness assemblies.
3 To remove the wire connector on the left door, press the top of the connector and pull it away.
Wire connector
14
8 mm wrench
www.insigniaproducts.com
4 mm Allen wrench
Hinge cover
Advertisement
Table of Contents
