Connecting The Water Supply - Insignia NS-RFD26XSS3 User Manual

25.4 cu. ft. french door refrigerator
Table of Contents

Advertisement

5 Replace the freezer upper drawer onto the rails.
6 Close the freezer drawers.

Connecting the water supply

Your refrigerator comes with a water dispenser and an ice maker. To use these features, you need to connect your
refrigerator to a drinking (potable) water supply. In order for the ice maker to operate correctly, the water pressure needs
to be between 30 and 125 psi (207 to 862 kPa). If your refrigerator is installed in an area with low water pressure (below
30 psi (207 kPa)), you can install a booster pump to compensate for the low pressure. Under normal conditions, a 5.75 oz.
(200 cc) cup can be fill in about 10 seconds.
To help promote better health, the water filter removes unwanted particles from your water. However, it does not sterilize
or destroy microorganisms. You may need to purchase a water purifying system to do that.
CAUTIONS:
• A qualified plumber should make the water connection.
• Using water pressure that is outside the 30 to 125 psi (207 to 862 kPa) range can cause serious malfunction and severe, damaging
water leaks.
Note: If you install your refrigerator in an area with low water pressure (below 30 psi (207 kPa)), you can install a booster pump to
compensate for the low pressure.
www.insigniaproducts.com
25.4 Cu. Ft. French Door Refrigerator
Freezer upper drawer
21

Advertisement

Table of Contents
loading

Table of Contents