Table of Contents
Advertisement
This document briefly explains the operations that need to be performed by the user in order to
connect an ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000 model 700, 800,
900, 1100, 1200, 2100, or 2200 Disk storage system to a server running Solaris OS, HP-UX,
Windows®, Linux, or VMware ESX via an iSCSI interface.
This document should be used in conjunction with other applicable user manuals, such as those
for the ETERNUS4000 model 300, 400, 500, or 600, or ETERNUS8000 model 700, 800, 900,
1100, 1200, 2100, or 2200 Disk storage system, server, OS used, iSCSI HBAs, LAN cards, driv-
ers, etc.
This document references the following documents:
•
ETERNUSmgr User Guide
Also, note that in this document the ETERNUS4000 models 300, 400, 500, and 600, and
ETERNUS8000 models 700, 800, 900, 1100, 1200, 2100, and 2200 Disk storage systems are
collectively referred to as ETERNUS Disk storage systems.
The Contents and Structure of this Manual
This document is composed of the following two chapters.
•
Chapter 1 Workflow
This describes the workflow when setting up an ETERNUS Disk storage system.
•
Chapter 2 ETERNUS Disk Storage System Connection Settings
This describes the settings used when connecting an ETERNUS Disk storage system.
P3AM-4172-02ENZ0
Server Connection Guide (iSCSI) ETERNUS Disk Storage System Settings
3
Preface
Second Edition
December 2010
Copyright 2010 FUJITSU LIMITED
Advertisement
Table of Contents
