Replacement Instructions - Gree LSQWRF35VM/NhA-M Service Manual

4.4.2 Replacement instructions

(1) LSQWRF35VM/NhA-M
Note: be sure there is no refrigerant inside the system and power supply has been cut off before
replacement.
Steps
1. Remove the
front panels.
2. Remove power
lines and the
electric heater.
3. Disconnect
power lines to the
compressor.
Replacement of the compressor
Image
64
Instructions
• Remove screws at the front
pane.
• Loosened screws should be
put together to avoid loss.
• Pull the front panel upwards
and then remove it.
• Properly keep the removed
front panel to avoid from
being damaged.
• Note: there are two clasps
at each panel for connecting
with side panels.
• Remove the insulation of the
compressor.
• Loosen screws of power lines
with a screwdriver.
• Draw out power lines.
• Draw out the electric heater.
• Note: power lines and
their terminals should be
numbered to avoid incorrect
rewiring.
• Desolder pipes quick to avoid
deformation.
• Keep the replaced
compressor complete for
further analysis.