Oil Filter; Oil Recommendations - Volvo Penta TAD941GE Operator's Manual

Oil
Oil capacity including oil filters, approx.:
Oil pressure, hot engine:
at operating speed
Oil pressure during neutral

Oil filter

Full flow filter
By-pass filter
Lube Oil Pump
Type

Oil recommendations

Oil grade
VDS-3
2)
VDS-2
NOTICE! Mineral based oil, as well as fully or semi-synthetic, can be used on condition that it complies with
thequality requirements above.
1) If sulfur content is > 1.0 % by weight, use oil with TBN > 15.
2) The oil must also comply with at least one of the following specifications ACEA:E7, ACEA:E5, Global DHD-1, API:CI-4 or API:CH-4.
VDS = Volvo Drain Specification
ACEA = Association des Constructeurs Européenne d'Automobiles
API = American Petroleum Institute Global
DHD = Global Diesel Heavy Duty
TBN = Total Base Number
47702660 03-2013 © AB VOLVO PENTA
Lubrication System
35litre (9.25 US gal)
300-600 kPa (44–87 psi)
270 kPa
2
1
Gear driven
Sulfur content in fuel, by weight
up to 0,5 %
Oil change interval: Reached first in operation:
600 hrs / 12 month
Viscosity
Select the viscosity according to the table.
The temperature values refer to stable ambient tem-
peratures.
* SAE 5W/30 refers to synthetic or semi-synthetic oils.
0,5 – 1,0 %
300 hrs / 12 month
Technical Data
1)
more than 1,0 %
150 hrs / 12 month
65